The EE300Ex is simple to install due to efficient separation of the measurement unit and the connecting area.
15, October 2016: The intrinsically safe EE300Ex humidity and temperature transmitter from E+E Elektronik has been certified according to TIIS. The device, which already meets the relevant requirements for Europe and North America (ATEX, IECEx, FM), may now be employed in Japan as well. TIIS-certified EE300Ex devices can be obtained from the Japanese E+E sales partner TEKHNE Trading Co., Ltd.
EE300Ex is dedicated for use in potentially explosive environments and can be installed directly in both gas and dust hazardous areas of zone 0 / 20. The device accurately measures relative humidity and temperature in the range from 0 to 100% RH and -40 to 180°C (-40...356 °F) with pressure rating up to 300 bar (4351 psi). The EE300Ex is also available for moisture measurement in oil as well as for temperature measurement only.
The EE300Ex is very easy to install due to the separation of the measurement unit and the connecting area. The two-part enclosure allows the measurement unit to be removed for maintenance or calibration, while the connecting area remains in place with intact wiring.
The EE300Ex is available as wall mount or with a remote sensing probe with up to 10 m probe cable length. The measured values are shown on the optional display. The enclosure and the probe of high-quality stainless steel are suitable even for harsh industrial conditions. The proprietary E+E coating protects the sensors from contamination and corrosion, which leads to outstanding long-term stability.
The measured values are issued on two 4…20 mA outputs. In addition to the measured relative humidity and temperature, the EE300Ex calculates other physical quantities such as dew point or frost point temperature, absolute humidity and mixing ratio. Individual configuration of the transmitter and adjustment of the analogue outputs can be easily performed with the free configuration software.
Further information about the EE300Ex are available at www.intrinsically-safe-measurement.com
For Media Contact:
E+E Elektronik Ges. m.b.H.
Phone: 0043 7235 605 0
Contact DetailsCompany Name: E+E Elektronik Ges. m.b.H.Issued By: Johannes FraundorferPhone: 0043 7235 605 0Address: Langwiesen 7,City: Engerwitzdorf, State: Engerwitzdorf, Zip: 4209, Country: AustriaWebsite: Visit the website
by Johannes Fraundorfer (few months ago!)